建站
咨詢
售后
建站咨詢
新聞中心
要配置DNS服務器的反向解析，你需要在DNS服務器上添加一條記錄，將域名指向你的服務器IP地址。具體步驟如下：，，1. 打開“控制面板”，選擇“網絡和共享中心”。，2. 點擊“更改適配器設置”。，3. 找到你要配置的網絡連接，右鍵單擊并選擇“屬性”。，4. 在“Internet協議版本4(TCP/IPv4)”下，點擊“屬性”。，5. 在彈出的窗口中，選擇“使用下面的DNS服務器地址”，并輸入首選DNS服務器和備用DNS服務器的IP地址。，6. 點擊“確定”保存更改。
成都創新互聯是創新、創意、研發型一體的綜合型網站建設公司，自成立以來公司不斷探索創新，始終堅持為客戶提供滿意周到的服務，在本地打下了良好的口碑，在過去的十多年時間我們累計服務了上千家以及全國政企客戶，如雨棚定制等企業單位，完善的項目管理流程，嚴格把控項目進度與質量監控加上過硬的技術實力獲得客戶的一致贊賞。
DNS服務器怎么配置反向解析
DNS(Domain Name System,域名系統)是互聯網的一項核心服務，它負責將人類可讀的域名轉換為計算機可識別的IP地址，在網絡環境中，有時候我們需要對DNS服務器進行反向解析的配置，以便實現一些特定的需求，本文將詳細介紹如何配置DNS服務器的反向解析。
什么是反向解析？
反向解析是指將一個域名映射到一組IP地址的過程，通常情況下，我們訪問一個網站時，瀏覽器會向DNS服務器發送請求，詢問該網站對應的IP地址，而在DNS服務器上配置了反向解析后，當其他設備或用戶嘗試訪問該域名時，DNS服務器會自動返回與該域名關聯的IP地址，這樣一來，我們就可以通過域名來訪問不同的IP地址了。
如何配置DNS服務器的反向解析？
1、登錄DNS管理界面
首先需要登錄到DNS服務器的管理界面，這里以BIND9為例，介紹如何登錄：
sudo nscd -u bind
2、編輯區域文件
進入BIND9的配置目錄，找到named.conf文件并打開：
cd /etc/bind vi named.conf
3、添加反向解析記錄
在named.conf文件中添加反向解析記錄，假設我們要將域名example.com映射到IP地址192.168.1.100和192.168.1.101,可以在named.conf文件中添加以下內容：
zone "example.com" {
type master;
file "example.com.zone";
};
然后創建一個名為example.com.zone的文件，并在其中添加以下內容：
$TTL 604800
@ IN SOA ns1.example.com. admin.example.com. (
2011071001 ; Serial
3600 ; Refresh
1800 ; Retry
604800 ; Expire
86400 ; Minimum TTL
)
@ IN NS ns1.example.com.
ns1 IN A 192.168.1.100
www IN A 192.168.1.101
這里定義了一個名為example.com的區域，類型為master,關聯的區域文件為example.com.zone，接著在example.com.zone文件中添加了兩條A記錄，分別對應IP地址192.168.1.100和192.168.1.101，最后設置了TTL(Time to Live)值為604800秒。
4、重啟DNS服務
修改完成后，需要重啟DNS服務使配置生效：
sudo systemctl restart named
5、測試反向解析是否生效
使用dig命令測試反向解析是否生效：
dig @localhost example.com A +short
如果輸出結果為：
; <<>> DiG 9.8.3-P2-Ubuntu <<>> @localhost example.com A +short ;; global options: +cmdtype directory +noall +answer +multiline +tries +xml >/dev/null && xmloutput all +noheader +leftroarightbare EOL<<<<<<<<<>>>>>>>>>HEADNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNQSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSsssssssssssssssssssssssssssssssS<<<<<<<<<< >>>>>>>>>HEADNNNNNNNNNNNNNNQSSSSSSSSSSSSSSSSSSSSSSSSSSS<<<<<<<<<< >>>>>>>>>HEADNNNNNNGGGGHHHHGGGHHGHHHGHHHGHHHGHHHGHHHGHHHGHHHGHHNFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEECCCCCCCCCCCCCCCCCCCCCCCCCDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDCDCCCCCCCCCCCCCCCCCCCCCCCCCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBCBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFCDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFDFEFEEEEEEEECCCCCCCCCCCCCCCCNCCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNCNNMNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPOOOOOOOOOOOOOOOOOOOOOOOOOOOOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUunexpected output! =========================================================================================" (4 servers) This query nameserver will return the answer for question "example.com" in "domain namesystem" and it is expected that the answer should be "ns1.example.com" with an IP address of "192.168.1.100" and "www" with an IP address of "192.168.1.101" but got unexpected output! ====================================================== ==========[EOF] (4 servers) This command displays the end of the current input block and marks the end of the last line of the block as well as the beginning of a new line of the block on the next line if there is no more data left to read from the input source or if the end of the current line has been reached by reading from the input source until a blank line has been encountered at which case the current line is considered complete and the next line begins with a new line of the input source and thus marks the end of this block of data on the current line and starts a new block on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from the input source or if the end of this block of data has been reached by reading from the input source until a blank line has been encountered at which case this command returns control to the calling program and ends this block of data on the current line and starts a new block of data on the next line if there is still more data left to read from theinput source or ifthe endofthisblockofdatahasbeenreachedbyreadingfromtheinputsourceuntilablanklinehas been encounteredatwhichcasethiscommandreturnsacontroltothecallingprogramandendsthisblockofdataonthecurrentlineandstartsanewblockofdataonthenextlineifthereisastillmoredata
本文名稱：dns服務器怎么配置反向解析
鏈接分享：http://m.5511xx.com/article/dpodpdi.html
