建站
咨詢
售后
建站咨詢
新聞中心
CentOS NFS(網絡文件系統)是一種在分布式計算環境中實現文件共享的協議，通過使用NFS,可以在不同的計算機之間共享文件和目錄，從而實現數據和資源的高效利用，本文將介紹如何在CentOS 7上安裝和配置NFS服務。
網站建設哪家好，找創新互聯！專注于網頁設計、網站建設、微信開發、小程序開發、集團企業網站建設等服務項目。為回饋新老客戶創新互聯還提供了陽原免費建站歡迎大家使用！
一、安裝NFS服務
1. 確保系統已經更新到最新版本，在終端中輸入以下命令：
sudo yum update
2. 安裝NFS服務所需的軟件包，在終端中輸入以下命令：
sudo yum install nfs-utils
3. 啟動并設置NFS服務開機自啟，在終端中輸入以下命令：
sudo systemctl start nfs-server sudo systemctl enable nfs-server
4. 查看NFS服務狀態，在終端中輸入以下命令：
sudo systemctl status nfs-server
二、配置NFS共享目錄
1. 創建一個用于共享的目錄，創建一個名為“/shared”的目錄：
sudo mkdir /shared
2. 設置該目錄的權限，以便其他用戶可以訪問和修改，設置為所有用戶可讀寫：
sudo chmod 777 /shared
3. 在客戶端計算機上創建一個掛載點，用于訪問共享目錄，創建一個名為“/mnt/nfs”的目錄：
sudo mkdir /mnt/nfs
4. 將遠程服務器上的共享目錄掛載到客戶端計算機上，假設遠程服務器的IP地址為“192.168.1.100”，則執行以下命令：
sudo mount -t nfs 192.168.1.100:/shared /mnt/nfs
5. 若要使掛載在系統啟動時自動生效，需要編輯“/etc/fstab”文件，備份文件：
sudo cp /etc/fstab /etc/fstab.bak
使用文本編輯器打開“/etc/fstab”文件，例如使用“vi”編輯器：
sudo vi /etc/fstab
在文件末尾添加以下行，其中“192.168.1.100”是遠程服務器的IP地址，“/shared”是共享目錄的路徑：“192.168.1.100:/shared /mnt/nfs nfs defaults 0 0”
保存并關閉文件，執行以下命令使更改生效：
sudo mount -a
三、驗證NFS共享是否成功
1. 在客戶端計算機上運行以下命令，查看掛載點下的內容：
ls /mnt/nfs
如果可以看到共享目錄中的文件和子目錄，說明NFS共享已成功。
2. 在遠程服務器上檢查“/var/log/messages”文件，查找與NFS相關的日志信息，如果看到類似以下內容的日志，說明NFS服務正在正常運行：
“`
Mar 3 10:23:45 server kernel: NFS client version 3 called Mount(192.168.1.100://shared) from (192.168.1.200) at Mar 3 10:23:45 by user nobody on Linux version 3.10.0-514.el7.x86_64 (systemd-238) with TCP_NODELAY enabled (protocol in use PXE-RSP/MMU/HUD) using localtime(Crunchy) and nolock(vfs) options; protocol VFS_NOLOCK (tcp), Retry: yes (max=3), Timeout in isochronous mode set to 60 seconds (RPC_TIMEOUT=60). VFS error (device or resource busy), device or resource busy (192.168.1.100://shared) is not a directory or is empty. [kernel] IP table flush before namespace switch. [IPV4] NETLINK address family [genl]: autoconfig failed (-1): Checking for a default router now without sending any packets to the network! This might take a few minutes depending on your network setup! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unreachable (netlink)! [IPV4] Network is unReachablE(NETLINK): No route to host, disconnecting … done.[iproute2-default(7)]: REJECT xmit queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only; reject rcv queue full, statistics only
分享文章：centosnfs配置
鏈接分享：http://m.5511xx.com/article/dhjieoc.html
