建站
咨詢
售后
建站咨詢
新聞中心
這里有您想知道的互聯網營銷解決方案
Linux下安裝SVN服務端的方法步驟
一、yum 安裝
站在用戶的角度思考問題，與客戶深入溝通，找到興海網站設計與興海網站推廣的解決方案，憑借多年的經驗，讓設計與互聯網技術結合，創造個性化、用戶體驗好的作品，建站類型包括：成都網站建設、成都網站制作、企業官網、英文網站、手機端網站、網站推廣、域名注冊、虛擬空間、企業郵箱。業務覆蓋興海地區。
yum install subversion
二、配置
1、創建倉庫
我們?cè)?home下建立一個名為SVN的倉庫（repository），以后所有代碼都放在這個下面，創建成功后在svn下面多了幾個文件夾。
[root@localhost /]# cd /home [root@localhost home]# mkdir svn [root@localhost home]# svnadmin create /home/svn [root@localhost home]# ls svn conf db format hooks locks README.txt
conf文件夾，是存放配置文件的
[root@localhost home]# cd svn/conf [root@localhost conf]# ls authz passwd svnserve.conf
- authz 是權限控制文件
- passwd 是帳號密碼文件
- svnserve.conf 是SVN服務配置文件
2、配置passwd 文件
[root@localhost conf]# vim passwd ### This file is an example password file for svnserve. ### Its format is similar to that of svnserve.conf. As shown in the ### example below it contains one section labelled [users]. ### The name and password for each user follow, one account per line. [users] # harry = harryssecret # sally = sallyssecret user1=123456 user2=123456
3、配置authz
[root@localhost conf]# vim authz
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe
# [/foo/bar]
# harry = rw
# &joe = r
# * =
# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r
[/]
user1=rw
user2=r
*=
~ 4、配置svnserve.conf
[root@localhost conf]# vim svnserve.conf
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)
### Visit http://subversion.apache.org/ for more information.
[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
# realm = My First Repository
realm = /home/svn
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above. Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none
[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
最后一行的realm記得改成你的svn目錄
打開注釋時切記前面不要留有空格
三、啟動與停止
[root@localhost conf]# svnserve -d -r /home/svn（啟動） [root@localhost conf]#kill all svnserve（停止）
本篇文章到此結束，如果您有相關技術方面疑問可以聯系我們技術人員遠程解決，感謝大家支持本站！
創新互聯服務器托管擁有成都T3+級標準機房資源，具備完善的安防設施、三線及BGP網絡接入帶寬達10T，機柜接入千兆交換機，能夠有效保證服務器托管業務安全、可靠、穩定、高效運行；創新互聯專注于成都服務器托管租用十余年，得到成都等地區行業客戶的一致認可。
網站題目：Linux下安裝SVN服務端的方法步驟
轉載來于：http://m.5511xx.com/article/cdjphie.html
